Mig Welder 200 L MIG/MAG/MMA/TIG WELDER AND PLASMA CUT 5-1 200AMP 220v WELDING MACHINE 

The Mig Welder 200 l Mig can be used with or without Gas And 5 in 1 Electrode INVERTER MIG/MMA/TIG DC Lift Tig 200AMP- Comes with torches, earth clamp, welding cable, brush/hammer, protective mask/ To use it as a TIG, you have to position the machine to operate as an electrode weld

Upgrade your machine to the New MIG 200 L Welding Machine – Mig With And Without Gas And 5 in 1 Electrode

Welding machine MIG 200L – 220V

MIG welding with or without gas and electrode welding

Working amperage: 20 to 200A welding in the MIG processor 20 to 160A welding in the electrode process Duty
cycle: 35% in MIG process in 200A or 35 % in electrode process in 160A

Accepts wire rolls of 1 to 5 Kg

It has a thermal sensor to disable the machine in case of over heating.

It has wire release speed regulation in the MIG process.

The MIG 200L welding machine allows welding with or without shielding gas (using the appropriate wire for each type of welding)

Ideal for welding sheets and metal with thickness from 1.00 mm in the MIG

process Welding with the proper wire for use without gas in the MIG welding process works perfectly in open and windy places

Often used in welding automotive sheets in the MIG process and locksmiths in the MIG process or electrode.

The MIG 200L also allows welding with a coated electrode of up to 4 mm.

To weld with a coated electrode, simply change the torch and select the electrode welding option, on the machine panel.

The MIG 200L welding machine is lightweight and portable equipment, perfect for services in the welding field in your company or even outside it

The perfect welding machine for your services

Comes with a MIG torch, electrode torch, and negative claw

To use it as a TIG, you have to position the machine to operate as an electrode weld

Developed as an alternative to “scratch starts” or high-frequency (HF) arc starts, Lift TIG provides consistent, positive arc starts for welding with a DC output.

There were two primary reasons to develop Lift TIG. First, HF current can interfere with electronics, including laptop computers and CNC machinery.

Second, the scratch start technique, where the operator scratched the tip of the tungsten on the workpiece with a motion similar to that of striking a match, could contaminate the weld with tungsten particles.

In a critical application, arc starts would need to be ground out and rewelded.

How to configure your Mig Welding Machine 200L

MIG GAS WELDING CONFIGURATION: AMBILICAL PLUG TO +

EARTH CLAMP –

MIG NO GAS – CORE FLUX WIRE WELDING CONFIGURATION: AMBILICAL PLUG TO –

EARTH CLAMP +

TIG WELDING Lift Tig: AMBILICAL PLUG TO +

EARTH CLAMP –

[table id=3 /]

FAQ